WiFi & App Integration
The Piano Guard App is accessible from your desktop or mobile device and allows you to observe the environment around your piano. The sensors will send readings about the temperature and relative humidity, as well as the water level in the humidifier bucket. Be sure to enable notifications from Piano Guard to get alerts about low water levels and service needs!
1
Prepare the Control Panel
On the control panel, press and hold the CONFIG button.
While keeping the CONFIG button pressed, click the RESET
button. After 5 seconds, you can release the CONFIG button. The front panel light should now be green.
2
Connect to Piano Guard WiFi
Connect your phone or computer to the PIANO_GUARD_SYSTEM network on the Wi-Fi networks list. Then, open the internet browser and enter this address: 192.168.1.1
3
Remember Your Keys
You should see a page with the key access you’ll use to connect your Piano Guard System. Don’t lose your keys! Write down the ID number or take a screenshot of the information.
4
Connect to Home WiFi
In the SSID field, enter your home WiFi network exactly as it appears on your device, then enter your WiFi password under Password.
5
Restart the System
Click Reset on the control panel, or unplug the Piano Guard System for a moment and then plug it back in.
Signal Colors
System is ready for WiFi configuration
System needs water
System is working